This is a mini OLED which is designed for the Raspberry Pi, it can work with Pi 1, B +, Pi 2, Pi 3 and Pi Zero. We tried it on a Raspberry Pi 3 and a Pi Zero. The PiOLED comes with a monochrome…
Author
shedboy71
-
-
In this article we look at an ADS1115 add on board for a Raspberry Pi 4. It has an NTC thermistor on board for testing. First lets look at the board and then a bit of information about the ADS1115 ADS115 Information The ADS1113, ADS1114,…
-
In this article we look at yet another humidity and temperature sensor from TI – this time its the HDC2080 which we will connect up to a Raspberry Pi Lets look at some of the technical information and data from TI HDC2080 Information The HDC2080…
-
In this article we look at another sensor – this time its the LIS3MDL which is a 3-axis MEMS magnetic field sensor, digital output, I2C, SPI, low power mode, high performance Sensor Information The LIS3MDL has user-selectable full scales of ±4/±8/±12/±16 gauss. The self-test capability…
-
In this article we look at a BH1745NUC Luminance and Colour Sensor and connect it to a Raspberry Pi 3 The BH1745NUC is digital color sensor IC with I²C bus interface. This IC senses Red, Green and Blue light (RGB) and converts them to digital values.…
-
In this article we look at another sensor – it is a BMP388 by Bosch Sensortec, so lets crack on and try this out with a Raspberry Pi 3 BMP388 Information The BMP388 is a very small, low-power and low-noise 24 bit absolute barometric pressure…